AMIG8213 Steel ALC112 30ml.

High quality metallic paint perfect to obtain the typical metallic color of Burnt Iron finish. Similar strength to lacquer/cellulose automotive paints.

This color is airbrush ready, no thinning necessary. Spray at 12-15psi and from a distance of 2-3 inches from the surface in light misted coats. The surfaces to be painted must be thoroughly clean and free from dust, grease, oil and finger prints. Avoid prolonged breathing of vapors and ensure adequate ventilation. Apply a primer before use. Primers should be lightly polished with 1000/1200 wet & dry paper to give a less absorbent smooth surface. Clean airbrush with A.MIG-8200 (307 Lacquer thinner and cleaner).

Paint manufactured by Alclad II according its original formulation and now distributed by AMMO of Mig Jimenez as well.